The Topo map, as it is called in the Atrium, depicts three important times and places in Jesus' life. The first is when the Angel Gabriel announces to Mary in Nazareth that she is to be the mother of God. The symbol of a flame representing the Holy Spirit is glued on the control chart in Nazareth. The second moment is Jesus' birth. The children learn that Bethlehem was in a mountainous area and the Holy Family needed to climb from Nazareth to Bethlehem, a hard journey on foot. A star is used for the birth and glued on Bethlehem. The last is the place Jesus dies in Jerusalem shown as a cross. These symbols are made of leather and painted. Sculpy clay or foam board would have been a good choice as well. Also, a good map showing these various regions was needed as a model for accuracy. Of course, the elevations are guessed at but the children like to feel it and think about it, which helps with their meditation.
There are corresponding stick pins with these same symbols in the small box to the left in the picture. The children take the pins, which are paper clips and stick them in the holes for the correct city to match the important event. The holes were made with a drill using a very small bit.
This map represents an ancient map of Israel and surrounding areas. However, the children are fascinated by the mountains and the bodies of water. They learn that the Dead Sea, the Jordan River and the Sea of Galilee are all places where Our Lord preached as an adult and where he spent most of His life. The Mediterranean Sea is the large body of water you see.
To create this work I found a large tray at Walmart and turned it upside down as I wanted the deeper side to create the mountains and to frame the map. I used joint compound which I bought at Ace Hardware. It's a pretty pastey material but I formed the mountains with it and it dried hard after five hours or so. I let it sit all night to make sure all the moisture was gone before I began painting.
I used poster board to create the control map and painted it to match the topo map inside the lid my husband made for me. He actually covered it in leather and engraved "The Holy Land" on top. This is usually presented right before the Nativity Narratives and the children really like it and go back to it again and again.
There are corresponding stick pins with these same symbols in the small box to the left in the picture. The children take the pins, which are paper clips and stick them in the holes for the correct city to match the important event. The holes were made with a drill using a very small bit.
This map represents an ancient map of Israel and surrounding areas. However, the children are fascinated by the mountains and the bodies of water. They learn that the Dead Sea, the Jordan River and the Sea of Galilee are all places where Our Lord preached as an adult and where he spent most of His life. The Mediterranean Sea is the large body of water you see.
To create this work I found a large tray at Walmart and turned it upside down as I wanted the deeper side to create the mountains and to frame the map. I used joint compound which I bought at Ace Hardware. It's a pretty pastey material but I formed the mountains with it and it dried hard after five hours or so. I let it sit all night to make sure all the moisture was gone before I began painting.
I used poster board to create the control map and painted it to match the topo map inside the lid my husband made for me. He actually covered it in leather and engraved "The Holy Land" on top. This is usually presented right before the Nativity Narratives and the children really like it and go back to it again and again.
No comments:
Post a Comment